采用反相气相色谱法研究顶空固相微萃取过程中烃类在聚二甲基硅氧烷中的吸附和扩散。

ty10086 提交于 周三, 08/25/2021 - 16:01
文章英文标题
Investigation of sorption and diffusion of hydrocarbons into polydimethylsiloxane in the headspace-solid phase microextraction sampling process via inverse gas chromatography.
正文
采用反相气相色谱法研究顶空固相微萃取( HS-SPME )采样过程中烃类在聚二甲基硅氧烷( PDMS )中的吸附和扩散。本研究采用6种烃类作为分子探针,2种不同平均分子量的非交联PDMS作为固定相。采用含有PDMS固定相的柱进行实验测量,得到烃类探针在60 ~ 90℃温度范围内的比保留体积、摩尔吸附焓、相互作用参数、扩散系数和扩散活化能,发现烃类在PDMS SPME纤维中吸附的主要驱动力是摩尔吸附焓,其大小取决于烃类的分子大小。随着碳氢化合物分子尺寸的增大,其摩尔吸附焓变大。相互作用参数和扩散系数表明,正庚烷和正辛烷均向PDMS基体中扩散并局域化形成团簇或聚集体,导致更多的负摩尔吸附熵。然而,由于n -壬烷和芳香族探针分子尺寸大,结构柔性差,导致其扩散能力有限。烃类吸附的摩尔焓与PDMS的平均分子量无关。然而,烃类的比保留体积、相互作用参数、扩散系数和扩散活化能取决于PDMS的分子量以及烃类的分子量和结构,如Wilcoxon符号秩检验结果所示。
文章内容(英文)
Inverse gas chromatography was employed to investigate the sorption and diffusion of hydrocarbons into polydimethylsiloxane (PDMS) in the headspace-solid phase microextraction (HS-SPME) sampling process. Six hydrocarbons as molecular probes and two types of non-cross-linked PDMS with different average molecular weights as stationary phases were used in this study. Experimental measurements with columns containing a PDMS stationary phase were carried out to obtain specific retention volumes, molar enthalpies of sorption, interaction parameters, diffusion coefficients, and activation energies of diffusion of hydrocarbon probes over temperatures ranging from 60 to 90°C. The primary driving force of the hydrocarbon sorption into the PDMS SPME fibers was found to be the molar enthalpy of sorption, which depended on the molecular size of the hydrocarbons. As the molecular size of the hydrocarbon increased, the molar enthalpies of sorption became more exothermic. Interaction parameters and diffusion coefficients indicated that both n-heptane and n-octane were diffused into the PDMS matrix and localized to form clusters or aggregates, which were responsible for more negative molar entropies of sorption. However, the diffusivities of n-nonane and aromatic probes were limited due to their large molecular size and lack in the structural flexibility, respectively. The molar enthalpies of hydrocarbon sorption were independent of the average molecular weight of PDMS. However, specific retention volumes, interaction parameters, diffusion coefficients, and activation energies of diffusion of the hydrocarbons depended on the molecular weight of PDMS as well as the molecular weights and structures of hydrocarbons, as shown by the results of the Wilcoxon signed-rank test.
来源出处
Journal|[J]Journal of Chromatography AVolume 1639, 2021. PP 461894-461894
DOI
https://doi.org/10.1016/J.CHROMA.2021.461894

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。