热脱附气相色谱-质谱联用技术分析铜绿假单胞菌体外生物膜挥发性代谢产物。

ty10086 提交于 周三, 08/25/2021 - 17:20
文章英文标题
Analysis of volatile metabolites from in vitro biofilms of Pseudomonas aeruginosa with thin-film microextraction by thermal desorption gas chromatography-mass spectrometry.
正文
囊性纤维化( Cystic fibrosis,CF )是一种常染色体隐性遗传病,可导致气道黏液增厚。这些条件有利于多菌性感染,如慢性肺部感染,其中铜绿假单胞菌( P . aeruginosa )是CF患者生命末期定植CF肺部的主要致病菌。这项体外研究使用铜绿假单胞菌生物膜模型,在部分囊性纤维化条件下,取样挥发性的胞外代谢产物。气体采样采用薄膜微萃取( TFME )和商用聚二甲基硅氧烷( PDMS )薄膜,负载薄膜分析采用气相色谱-四极杆质谱-热脱附( TD-GC-qMS )联用技术。为此,采用热重-大气压光离子化qMS ( TG- APPI-qMS )联用技术对两种市售薄膜进行了均一性和温度稳定性表征。采用本研究建立的方法对所选薄膜进行清洗。TD-GC-qMS法成功用于已知铜绿假单胞菌产生的挥发性代谢产物的标准。该方法在低纳米范围( 0.5 n M和1.5 n M )对中、低极性化合物的检测和定量均达到了极限。最后将所建立的方法应用于好氧和厌氧条件下铜绿假单胞菌DSM 50071生物膜产生的胞外挥发性代谢产物的研究。综上所述,两种条件下均能检测到11种代谢物。此外,本研究还表明,不同的氧气条件(有氧和无氧)会产生不同的胞外挥发性代谢产物。特定代谢物,如1 -十一烯(有氧)和2 -十一酮(无氧),可以被鉴定。该结果很有前途,因为生物膜模型可能适用于临床条件下铜绿假单胞菌的鉴定。此外,该模型可作为研究不同细菌单种或共培养产生的胞外挥发性代谢物的基础,也可用于肺脏条件的实施,如CF肺。这种可能性使得针对各种细菌感染病灶的CF患者,可以发展一种无创的‘床旁’呼吸分析方法。图形摘要。
文章内容(英文)
Cystic fibrosis (CF) is an autosomal recessive inherited disease which leads to a production of thickened mucus in the airways. These conditions are conducive to poly-microbial infections, like chronic lung infection, in which Pseudomonas aeruginosa (P. aeruginosa) is the major pathogenic bacterium colonizing CF lungs at the end of the lifetime of CF patients. This in vitro study uses a P. aeruginosa biofilm model under partly cystic fibrosis conditions, with a sampling of volatile extracellular metabolites. The gas sampling was done with thin-film microextraction (TFME) and commercial polydimethylsiloxane (PDMS) films, whereas the analysis of loaded films was done by gas chromatography coupled to quadrupole mass spectrometry and thermodesorption (TD-GC-qMS). For this purpose, two commercially available films were characterized by means of thermogravimetry coupled to a qMS with atmospheric pressure photo ionization (TG-APPI-qMS), regarding homogeneity and temperature stability. The selected film was cleaned using a method developed in this study. The TD-GC-qMS method was successfully used for standards of volatile metabolites which were known to be produced by P. aeruginosa. Limits of detection and quantification of the method for middle and less polar compounds in low nanomolar range (0.5 nM and 1.5 nM) were achieved. The developed method was finally applied to investigate the extracellular volatile metabolites produced by biofilms of the strain P. aeruginosa DSM 50071 under aerobic and anaerobic conditions. In sum, eleven metabolites could be found under both conditions. Furthermore, it was shown in this study that different oxygen conditions (aerobic and anaerobic) resulted in emitting different extracellular volatile metabolites. Specific metabolites, like 1-undecene (aerobic) and 2-undecanone (anaerobic), could be identified. The results are promising, in that the biofilm model may be applicable for the identification of P. aeruginosa under clinical conditions. Furthermore, the model could be the basis for studying extracellular volatile metabolites from different mono- or co-cultures of various bacteria, as well as the implementation of pulmonary conditions, like these in CF lungs. This possibility allows the development of a non-invasive \"at-bedside\" breath analysis method for CF patients in focus of various bacterial infections. Graphical abstract.
来源出处
Journal|[J]Analytical and Bioanalytical ChemistryVolume 412, Issue 12. 2020. PP 2881-2892
DOI
https://doi.org/10.1007/S00216-020-02529-4

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。