稳定、自修复、超疏水织物用于高效油水乳液分离

ty10086 提交于 周三, 08/25/2021 - 15:44
文章英文标题
Robust, self-healing, superhydrophobic fabric for efficient oil/water emulsion separation
正文
油水乳化液分离到今天是一个世界性的难题,大量的废油和溢油的排放对人类健康和整个环境造成了更大的危害。因此,在需要处理此类问题时,必须有必要的材料。超疏水涂层在处理这些问题上显示出了希望,但其耐久性差限制了其应用。为了克服这种情况,赋予自修复能力的超疏水涂层可以作为一种潜在的解决方案发挥作用。本工作通过将聚二甲基硅氧烷( PDMS )、ZIF-90和氟烷基硅烷( FAS )浸涂在亚麻织物上制备改性织物。PDMS是一种已知的有机硅,在自然界中首先被涂复在织物上作为底层的疏水基团,当疏水性丧失时,会迁移到织物表面以恢复其疏水性。然后通过水热处理将ZIF-90包复在织物表面,得到纳米级的粗糙度,然后用FAS对其进行改性,以提高织物的疏水性。改性织物超疏水,水接触角( WCA )为151°,对几种油水乳状液也表现出较好的分离能力,最高效率达99.5 %,通量为1213   L   m-2 h-1。改性织物具有优异的10个循环回用性,对机械耐久性和化学稳定性测试也表现出较好的稳定性,可在室温下自愈合,并可通过热处理。随后解释了自愈机制。试验后的分离效率和通量也很有希望,表明其在实际油水乳状液分离中具有潜在的应用前景。
文章内容(英文)
Oil/water emulsion separation to this day is a worldwide problem and the discharge of large amounts of waste oil and oil spills have caused more harm to human health and the environment as a whole. It is therefore important to have the necessary materials in case the need arises to handle such problems. Superhydrophobic coatings have shown promise in dealing with these issues but their poor durability limits their application. To overcome this situation, superhydrophobic coatings endowed with a self-healing ability can work as a potential solution. In this work, a modified fabric is prepared via dip-coating of Polydimethylsiloxane (PDMS), ZIF-90 and fluoroalkyl silane (FAS) on linen fabric. PDMS, a known organosilicon and hydrophobic in nature was first coated on the fabric to serve as the underlying hydrophobic that would migrate to the surface to restore hydrophobicity in case it is lost. ZIF-90 was then coated on the fabric via hydrothermal treatment to provide nanoscale roughness which was then modified with FAS to improve the hydrophobicity. The modified fabric was superhydrophobic with a water contact angle (WCA) of 151°. It also showed good separation capability for several oil/water emulsions, reaching a maximum of 99.5% efficiency and flux of 1213 L m −2 h −1 . The modified fabric exhibited excellent recyclability for 10 cycles and also showed good stability towards mechanical durability and chemical stability tests and could self-heal at room temperature and also by heat treatment. The self-healing mechanism was then explained. The separation efficiency and flux after the tests were also promising, suggesting its potential application in real oil/water emulsion separation.
来源出处
Journal|[J]Colloids and Surfaces A: Physicochemical and Engineering AspectsVolume 625, 2021.
DOI
https://doi.org/10.1016/J.COLSURFA.2021.126860

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。