渗透汽化法绿色提取紫苏挥发性有机物

ty10086 提交于 周三, 08/25/2021 - 16:22
文章英文标题
Green extraction of perilla volatile organic compounds by pervaporation
正文
紫苏精油中的挥发性有机化合物( VOCs )在医药和食品加工具有重要的应用价值。本工作采用渗透汽化法从稀水溶液中提取有价值的紫苏VOCs作为绿色工艺。选取具有不同官能团的3种代表性的紫苏VOCs (柠檬烯、芳樟醇和紫苏醛)作为模型组分,制备聚醚-嵌段酰胺( PEBA )和聚二甲基硅氧烷( PDMS )膜用于VOC的提取研究。考察了操作条件(进料浓度和温度)对膜渗透汽化性能的影响。在二元VOC /水混合物中,增加进料浓度增加了VOC通量,降低了分离因子。VOC通量也随温度显著增加,主要是由于渗透驱动力增强。通过比较二元VOCs /水和四元VOCs /水体系中VOCs的渗透蒸发性能,评价了耦合效应对多组分渗透的影响。结果表明,VOC的渗透行为受其他VOCs的影响,取决于渗透-渗透和膜-渗透相互作用。基于渗透汽化分离指数,PEBA膜对紫苏VOCs的萃取总体分离效率优于PDMS膜。由于渗透汽化不涉及任何化学溶剂,操作温度适中,为提取有价值的紫苏VOCs提供了绿色工艺。
文章内容(英文)
Volatile organic compounds (VOCs) present in perilla essential oil are of high interest in medicinal and food processing. In this work, pervaporation was implemented to extract the valuable perilla VOCs from dilute aqueous solutions as a green process. Three representative VOCs of perilla (i.e., limonene, linalool, and perillaldehyde) having different functional groups were selected as model components, and poly(ether-block-amide) (PEBA) and polydimethylsiloxane (PDMS) membranes were prepared for the VOC extraction studies. The influences of operating conditions (i.e., feed concentration and temperature) on the pervaporation performance of the membranes were investigated. In binary VOC/water mixtures, an increase in the feed concentration increased the VOC flux and decreased the separation factor. The VOC flux also increased significantly with temperature, mainly due to an augmented driving force for permeation. The impact of the coupling effects in multicomponent permeation was evaluated by comparing the pervaporation performance of VOCs in binary VOC/water and quaternary VOCs/water systems. Results show that the VOC permeation behavior was affected by the presence of other VOCs, depending on the permeant–permeant and membrane–permeant interactions. Based on pervaporation separation index, the PEBA membrane showed a better overall separation efficiency than the PDMS membrane for the extraction of perilla VOCs. Since pervaporation does not involve any chemical solvents and operates at moderate temperatures, it provides a green process for extracting valuable perilla VOCs.
来源出处
Journal|[J]Separation and Purification TechnologyVolume 261, 2021. PP 118281-
DOI
https://doi.org/10.1016/J.SEPPUR.2020.118281

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。