自封闭热塑性氟橡胶能够快速制备模块化微反应器

A novel fluorinated soft thermoplastic elastomer (sTPE) for microfluidics is presented. It allows the rapid fabrication of microfluidic devices through a 30‐second hot embossing cycle at 220°C followed by self‐sealing through simple conformal contact at room temperature, or with baking. The material shows high chemical resistance, particularly in comparison to polydimethylsiloxane (PDMS), to many common organic solvents and can be rapidly micropatterned with high fidelity using a variety of microfluidic master molds thanks to its low mechanical stiffness. Self‐sealing of the material is reversible and withstands pressures of up to 2.8 bar with room temperature sealing and four bar with baking at 185°C for 2 hours. The elastomeric, transparent sTPE exhibits material characteristics that make it suited for use as a microreactor, such as low absorption, surface roughness and oxygen permeability, while also allowing a facile and scalable fabrication process. Modular microfluidic devices, leveraging the fast and reversible room temperature self‐sealing, are demonstrated for the generation of water droplets in a toluene continuous phase using T‐junctions of variable size. The sTPE offers an alternative to common microfluidic materials, overcoming some of their key drawbacks, and giving scope for low‐cost and high‐throughput devices for flow chemistry applications.