半边PDMS涂层双参数PCF传感器用于海水盐度和温度的同时测量

ty10086 提交于 周三, 08/25/2021 - 15:42
文章英文标题
Half-side PDMS-coated dual-parameter PCF sensor for simultaneous measurement of seawater salinity and temperature
正文
提出了一种基于表面等离子体共振( SPR )的新型半侧PDMS涂层光子晶体光纤( PCF )传感器,用于海水盐度和温度的同时检测。在PCF的外表面镀上等离激元物质金,通过激发SPR效应测量海水盐度。此外,聚二甲基硅氧烷( PDMS )层作为独立的温度传感通道被涂复在传感器表面的上半边。研究了表面等离子体激元( SPPs )模式与四种不同核心模式之间的模式耦合特性。同时,利用有限元方法( FEM )对各种几何参数对传感特性的影响进行了理论模拟,数值结果表明,所设计传感器的盐度灵敏度可达0.307   nm /‰,分辨率为0.3257‰,在25 ~ 50  ℃的传感范围内,温度灵敏度为-4.937   nm /℃,分辨率为0.0203  ℃。该传感器具有制作简单、传感性能优良、成本低等优点,不仅实现了两个参数的同时测量,而且在海水监测领域具有潜力。
文章内容(英文)
A novel half-side PDMS-coated photonic crystal fiber (PCF) sensor based on surface plasmon resonance (SPR) is proposed for simultaneous detection of seawater salinity and temperature. The plasmonic material gold is coated on the outer surface of the PCF to measure the seawater salinity by exciting SPR effect. Moreover, the polydimethylsiloxane (PDMS) layer is coated on the upper half-side of the surface of the sensor as an independent temperature sensing channel. The properties of modes coupling between surface plasmon polaritons (SPPs) mode and four different core modes are investigated. Meanwhile, the influence of various geometrical parameters on the sensing characteristics are theoretically simulated by using finite element method (FEM). The numerical results show that the salinity sensitivity of the designed sensor can reach 0.307 nm/‰ with a resolution of 0.3257‰. Additionally, the temperature sensitivity of −4.937 nm/°C with the resolution of 0.0203 °C in the sensing range from 25 °C to 50 °C has been obtained. The proposed sensor, possessing advantages such as ease of fabrication, excellent sensing performance and low cost, not only realizes the simultaneous measurement of two parameters, but also has potential in the field of seawater monitoring.
来源出处
Journal|[J]Optical Fiber TechnologyVolume 65, 2021.
DOI
https://doi.org/10.1016/J.YOFTE.2021.102608

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。