2D和3D共空间分隔贴片,以提高角质形成细胞创面封闭的治疗效果

ty10086 提交于 周三, 08/25/2021 - 15:57
文章英文标题
2D and 3D co-spatial compartmentalized patch to enhance the therapeutic efficacy of keratinocytes for wound closure
正文
角质形成细胞常被用于受损皮肤组织的生物和生物医学重塑。然而,细胞存活率低、细胞维持不良以及缺乏旁分泌因子,阻碍了角质形成细胞对皮肤创伤愈合的治疗效果。在此,我们报道了一种用于微尺度角质形成细胞工程平台的2D和3D共空间分隔贴片( CSCP )的制备和一种新的角质形成细胞输送方法,以增强伤口闭合。在聚二甲基硅氧烷( PDMS )基底内刻制微型圆柱体,用于诱导和捕获三维角质形成细胞团簇。同时,将PDMS基底外表面作为2D角质形成细胞培养的区域。因此,CSCPs可以同时应用于体外角质形成细胞的2D和3D培养和体内细胞移植。3D角质形成细胞增加了细胞递送密度和血管生成因子的表达,但降低了细胞增殖,这与2D角质形成细胞的高增殖相辅相成。我们的体内实验结果证实,当细胞以2D和3D共空间方式传递时,角质形成细胞对创面封闭的治疗效果明显增强。我们利用CSCPs通过简单的双重空间控制来提高角质形成细胞的伤口闭合疗效,得到了同时上调分子机制的支持,为开发大规模的皮肤伤口愈合角质形成细胞递送系统提供了新的见解。
文章内容(英文)
Keratinocytes are frequently used for the biological and biomedical remodeling of damaged skin tissues. However, low cell viability, poor cell maintenance, and lack of paracrine factors hamper the therapeutic efficacy of keratinocytes for skin wound healing. Here, we report the fabrication of a 2D and 3D co-spatial compartmentalized patch (CSCP) for a microscale keratinocyte-engineering platform and a novel method for delivering keratinocytes to enhance wound closure compared to that achieved by the conventional keratinocyte delivery method. Micro-sized cylinders engraved within a polydimethylsiloxane (PDMS) substrate were fabricated to induce and trap 3D keratinocyte clusters. Simultaneously, the outer surface of the PDMS substrate was used as an area for 2D keratinocyte culture. As a result, the CSCPs could be simultaneously applied for both 2D and 3D in vitro keratinocyte culture and in vivo cell delivery. The 3D keratinocytes increased the cell density for delivery and angiogenic factor expression but decreased the cell proliferation, which was complemented by the high proliferation of 2D keratinocytes. Our in vivo results confirmed that the therapeutic efficacy of keratinocytes for wound closure was significantly enhanced when the cells were delivered in a 2D and 3D co-spatial manner. We used the CSCPs to improve the wound closing efficacy of keratinocytes by simple dual spatial control, which was supported by the simultaneous upregulation of molecular mechanisms, and provided new insights for the development of a large-scale keratinocyte delivery system for skin wound healing.
来源出处
Journal|[J]Chemical Engineering JournalVolume 409, 2021.
DOI
https://doi.org/10.1016/J.CEJ.2020.128130

PDMS臻品推荐

PDMS-微流控基质材料-PDMS/道康宁SYLGARD184-聚二甲基硅氧烷/0.5KG(组)

产品说明书PDF自助在线看:http://www.pdmshub.com/sih

信息更新:

美国总工厂生产的0.5KG原始包装的PDMS延期至2021年9月16日后才能交货,默认我们将发国内库存的进口分装产品(02085925-0.5KG);另受制于有机硅大幅涨价潮影响,2021年9月1日后将上调销售价格,另行通知。Dow Corning=道康宁=Dow SiL=陶氏,都是同一家公司。 2021.09.01更新

美国总工厂生产的0.5KG包装的PDMS恢复正常进口,合法正规,质量金标准,欢迎订购使用。并承诺从我司购买的皆为原厂包装,100%未开封,附带技术手册,非国产灌装仿制、非分装、非仿冒外包装产品,可以放心使用。大量订购更有优惠。2021.04.01更新

备注:由于dowsil与道康宁公司合并,美国总工厂生产的PDMS,价格涨幅高达1倍之多,因针对科研用户使用,特备货规格0.5KG。如果您需要美国总工厂原厂生产的大规格包装的预定,可以与QQ 11366508联系给予报价/货期。2021.05更新

此链接为PDMS-微流控芯片/PDMS/道康宁SYLGARD184/小桶0.5KG装的链接。

一般性的产品性能参数表参考以下小桶装的参数:

微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;微流控芯片/PDMS/道康宁SYLGARD184;

品牌型号:道康宁SYLGARD184

包装规格:0.5KG/罐[含有45.4g固化剂,总重量为0.5KG]

产品颜色:保质期限:36个月

存放环境说明:室温,阴凉处保存

备注说明:

美国道康宁道康宁SYLGARD 184硅橡胶是由液体组分组成的双组分套件产品,包括基本组分与固化剂。基本组分与固化剂按10:1重量比完全混合,中等粘度混合液的稠度与SAE 40机油相似。无论厚薄,混合液将固化成为具有韧性的透明弹性体,最适用于电子/电气方面的封装与灌封应用。 道康宁SYLGARD 184硅橡胶在25~150℃的温度范围内固化,无放热现象,无需二次固化。固化过程完成后,可立即在-55~200℃的温度范围内使用。 产品特性:低毒性,在常规的工业操作中,无特别的注意事项; 无溶剂或固化副产物, 固化时不放热;无需特殊的通风条件,不会产生腐蚀;固化时,收缩量小; 固化后, 透明具有弹性;抗震与减缓机械震动;振动的传递性能小;元件可裸视检查与易修补性; 环保性能;低吸水性,良好的耐辐射性能;高真空状态下的低漏气性; 优异的电性能;较大温度范围内的稳定性, 抗解聚;在-55~200℃范围内,甚至在密闭状态下保持弹性与柔韧性,性能稳定; 阻燃性,UL可燃性分级为94 V-1,温度等级:130℃ 产品用途: 道康宁SYLGARD 184硅橡胶在电气/电子的封装与灌封方面有广泛的应用。